Jiangsu Baode Heat-Exchanger Equipment Co., Ltd.
Main products:Plate Heat Exchanger,Brazed Plate Heat Exchanger,Gasket PHE
Products
Contact Us
  • Contact Person : Mr. Qi John
  • Company Name : Jiangsu Baode Heat-Exchanger Equipment Co., Ltd.
  • Tel : 86-510-86020253
  • Fax : 86-510-86020233
  • Address : Jiangsu,Jiangyin,No.33 xicheng road. wuxi
  • Country/Region : China
  • Zip : 234431

Solar water heat exchanger Copper brazed plate heat exchanger for water heating system

Solar water heat exchanger Copper brazed plate heat exchanger for water heating system
Product Detailed
Solar water heat exchanger 1.Copper brazed plate heat exchanger 2.Application: solar water heating system 3.Ss AISI316 plates

Solar water heat exchanger Copper brazed plate heat exchanger for water heating system

Solar Water heat exchanger

Working principles    The heating surface of water heat exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.Standard design    The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid.Standard materialsCover plates: Stainless steel AISI 316Connections: Stainless steel AISI 316Plates: Stainless steel AISI 316Brazing material: CopperParticulars required for quotation    To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:– flow rates or heat load required– temperature program– physical properties of liquids in question– desired working pressure– maximum permitted pressure dropAdvantages of brazed plate heat exchangers in Industry and HVAC&R    The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and HVAC&R applications.– The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited.– The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating.– The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short delivery time.Application:Refrigeration Systems : Evaporator , Condenser, Economizers and Desuperheaters Air dryer Heat pump Absorption chiller HVAC Radiant Floor, Snow Melt, Boiler and Solar water heat exchanger District heating Other Industrial applications such as:Heat Recovery and Oil Cooler: hydraulic oil cooling, engine oil cooling, and fuel oil heating.Steam Heating. Flat plate heat exchanger Beer wort cooler Milk pasteurization Wind turbine oil coolerMarine oil cooler

ModelBL14BL20BL26BL26CBL50BL95
Width, A [mm] 7876111124111191
Height, B [mm] 206310310304525616
Length, E [mm] 9+2.3n9+2.3n10+2.36n13+2.4n10+2.35n11+2.35n
Horizontal port distance, C [mm]424250705092
Vertical port distance, D [mm] 172282250250466519
Max pressure [Mpa] 3333/4.53/4.53/4.5
Max flowrate [M3/h] 3.63.68.18.112.739
Weight [kg] 0.6+0.06n1.0+0.08n1.3+0.12n2.2+0.16n2.6+0.19n7.8+0.36n
ModelBL120BL190BL200BL1400BL100  * BL200  *
Width, A [mm]246307321429248322
Height, B [mm] 5286967381398495739
Length, E [mm] 13+2.36n13+2.75n13+2.7n22+2.78n10+2.15n13+2.55n
Horizontal port distance, C [mm]174179188220157205.2
Vertical port distance, D [mm]4565676031190405631
Max pressure [Mpa] 332.11.53/4.53/4.5
Max flowrate [M3/h] 4210010030042100
Weight [kg] 7.2+0.52n12.5+0.72n13+0.75n31.8+1.73n6.5+0.37n13+0.78n

Solar water heat exchanger Copper brazed plate heat exchanger for water heating system



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.